Want to elevate your acoustic slat wall panels from simply functional to fabulously functional? Look no further than our innovative, integrated LED light strips! These strips seamlessly install within your panels, casting a warm glow that enhances the beauty of your slat wall while providing soft, ambient lighting. Â
Imagine creating a modern, sophisticated feel in your home office, or a calming atmosphere in your bedroom. With easy installation and dimming features, our LED light strips are the perfect way to transform your space with a touch of modern brilliance.
STRIVO LUME is available in single and double strip options with the remote control bundled as part of the kit.
Compatible with the STRIVO and Sulcado Acoustic panels.
What's in the box
12v LED Driver with 13amp plug - pre-wired
Remote control with Dimmer functions
3 x AAA Batteries for Remote control
1 x 9.6W Dotless LED Tape with 3M adhesive backing
1 x Aluminium LED Channel with Black smoke diffuser
Kit Contents
Plugged LED Driver
LED Tape reel with 2MTR power lead
The LED Driver is to be used only with the LED Tape supplied in the kit.
Aluminium Profile length including diffuser, end caps and fixing clips*
Installation (for LED Tape kit use)
Ensure the surface is clean and dust free by using the 3M surface prep wipe. Allow 2 minutes for the surface to dry.
If you need to reduce the length of the tape, partially peel back the red strip on the reverse of the tape.
Cut the tape at the indicated cut points using a sharp pair of scissors.
Fix the LED Tape to the surface applying pressure along the length to ensure a firm bond.
The micro connector plug on the LED Tape power lead should be placed into the black distribution block on the LED Driver.
Installation (for use with Aluminium profile)
The Aluminium profile, diffuser and LED Tape can be cut to the desired length if required.
Remove the opal diffuser from the aluminium profile. The profile end cap where the cable exits need to be cut to position the cable to exit towards the rear of the end cap.
Insert the LED Tape and opal diffuser - ensure all filings and swarf are removed before applying the LED Tape.
Fix the profile into place using the clips provided.
*Components included in Aluminium profile kit
